Non-woven | Professional | Flap Disc
Material to be grinded: Metal| Stainless steel (INOX) | Brass| Copper| Titanium| Aluminium
Application: Surface grinding, Deburring work，Contour grinding, Cleaning and gentle fettling of weld seams
Shape: T27 | T29
Raw Materail: Aluminium oxide | Silicon carbide
Grit Size Range: P100 - P280
Slice Design: Common rectangle
Attachment: Center Mount | Arbor Thread
Backing plate: Fiberglass/resin
Machine: Suitable for use on angle grinders of all output categories.
Product Uses:
This provide an ideal compromise between stock removal rate, suface quality, thermal load on the workpiece and too wear.
Recommendations for uses:
- Providing removal of rough grinding traces, removal of oxidation and heat discolouration, light deburring work, cleaning and gentle fettling of weld seams, and is a sufficient preparation for high-gloss polishing.
2. Finishing work after assembly in equipment, tank and pressure vessel construction.
3. The addition of the oil or water during the grinding results in a finer finish, cooler grinding and longer tool life.
4. Achieve their best performance at a recommended cutting speed of 15-35m/s
